Characteristics and functions of FEP teflon wire products
- Classification:news
- Author:
- Origin:
- Release time:2021-11-29
- Views:0
(Summary description)FEP teflon wire products is very suitable for high temperature applications in which higher heat output is required. It is resistant to high temperature change due to temperature of the wire or wire material.
Characteristics and functions of FEP teflon wire products
(Summary description)FEP teflon wire products is very suitable for high temperature applications in which higher heat output is required. It is resistant to high temperature change due to temperature of the wire or wire material.
- Classification:news
- Author:
- Origin:
- Release time:2021-11-29
- Views:0
FEP teflon wire products is very suitable for high temperature applications in which higher heat output is required. It is resistant to high temperature change due to temperature of the wire or wire material.Bent and Screw CoatingOur wire is treated with "Bent" and "Screw" CoatingCoating that prevents heat transfer between solder joints and prevents oxidation of solder joints.Efficiency Boosting SystemOur Electrolytic Heat Resistor (EHTR) is designed to increase efficiency at high temperatures. With our EHTR, the heat resistor has the potential to increase by 400% at temperatures up to 250C, which is 10x the output at 40C (50C at 100C) for a 4W output.
FEP teflon wire has excellent electrical properties, wide temperature range and chemical resistance.A standard DIN 3-pin connector is used to connect the DIP plugs of the 3V FEP boardBeware, while the three solder pads are spaced at 120mm as depicted on the board, it can be mounted anywhere on the board to reach the heat sink, provided the dimensions are well-scrappedTo assemble the FEP, the user simply inserts the three FEP pins in their respective sockets, and then pushes them until they form an assembly. If the solder pads of the FEP board are not perfectly even, it takes some force to place the pins where indicated on the schematic.FEP PCB mounting - A better way?The original FEP, which used FEP wires, required modification of the two soldering methods as well. In the end, it was decided to switch to DIP.
FEP teflon wire realizes high voltage protection due to the excellent dielectric properties of FEP wire.It is also resistant to electrical surges and to electrical shorts due to its low coefficient of frictional loss.Beware, FEP wire is only available with one end end as the other end is the exposed end of an electrical plug.
Scan the QR code to read on your phone
TELL US ABOUT YOUR
WIRE & CABLE NEEDS
智能分站
CONTACT US
ADD:Zhuyang industrial zone, Chengdong
Street, Yueqing, Zhejiang, China
TEL:+86-577-61600670 +8618358703175
E-MAIL:wrlong@wrlong.com
ZHEJIANG WRLONG HIGH TEMPERATURE WIRE & CABLE CO.,LTD 浙ICP备10044052号-3 浙公网安备 33038202003750号 SEO
MESSAGES